M3 X 18 PEM® brand self clinch studs for ultra thin sheets, steel zinc plated.
Type TFH non-flush studs are for sheets as thin as 0.51mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however, different punches and anvils are required.
Image is representative of range.
- Additional Information
Manufacturer PEM Part Number TFH-M3-18ZI Material Heat Treated Carbon Steel Finish Zinc Plated 5µm, Colourless Thread M3 Length 18mm Hole Size 3mm Hole Tolerance -0.0mm / +0.08mm MIN Sheet Thickness 0.51mm Sheet Hardness HRB 80 / HB 150 or Less