PEM TFH-M4-8ZI Ultra Thin Sheet Clinch Studs (Bag of 100)
SKU
PEMTFHM48ZI
Out of stock
£4.82
PEM TFH-M4-8ZI
M4 X 8 PEM® brand self clinch studs for ultra thin sheets, steel zinc plated.
Type TFH non-flush studs are for sheets as thin as 0.51mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however, different punches and anvils are required.
Image is representative of range.
| Manufacturer | PEM |
|---|---|
| Part Number | TFH-M4-8ZI |
| Material | Heat Treated Carbon Steel |
| Finish | Zinc Plated 5µm, Colourless |
| Thread | M4 |
| Length | 8mm |
| Hole Size | 4.0mm |
| Hole Tolerance | -0.0mm / +0.08mm |
| MIN Sheet Thickness | 0.51mm |
| Sheet Hardness | HRB 80 / HB 150 or Less |